|
|||||||||||||||||
|
- 기본 10채널 고정형 핸디타입
- 무선 LAN 대응
- 전채널 isolated, 다양한 input 지원
- 샘플링 속도 최고 10ms
- 4GB SD 카드 탑재
절연 Multi-Function 입력
전 채널 절연 입력 방식을 채용하여, 배선에 신경 쓸 필요가 없습니다.
또한 Multi-Function 입력에 대응하여 다양한 현상을 측정할 수 있습니다.
전압 | 20mV~100V, 1-5V/F.S. |
온도 | 열전대 : R, S, B, K, E, T, J, N, W (WRe5-26) |
습도 | 0~100% (옵션 B-530 필요) |
Pulse | 4ch |
Logic | 4ch |
최고 10ms 샘플링 속도에 대응
샘플링 속도 | 10ms | 20ms | 50ms | 100ms | |
사용 가능 ch 수 | 1 | 2 | 5 | 10 | |
측정 대상 | 전압 | ● | ● | ● | ● |
온도 | - | - | - | ● |
4GB 메모리로 장시간 수록 가능
표준 부속품으로 4GB 플래시 메모리가 탑재되어 있습니다. 수록 데이터는 GBD 형식이나 CSV 형식으로 보존 가능합니다.
수록 시간 예 (아날로그 10ch만 사용 시, 2GB 수록 시)
샘플링 속도 | 10ms | 50ms | 100ms | 200ms | 500ms | 1s | 10s |
GBD 형식 | 41일 | 88일 | 103일 | 207일 | 365일 이상 | 365일 이상 | 365일 이상 |
CSV 형식 | 3일 | 11일 | 16일 | 36일 | 91일 | 182일 | 365일 이상 |
* 수록 시간은 대략적으로 계산한 것입니다. 샘플링 속도에 따라서는 ch 수에 제한이 있습니다. 10ms : 1ch, 50ms : 5ch, 100ms : 10ch
Ring 수록 기능
GL240의 1회 데이터 수록 용량은 2GB입니다.
위 기능을 사용하여 데이터를 제거하지 않고 2GB 단위로 파일을 잘라 연속 수록이 가능합니다.
수록 중 SD 카드 교환 기능
데이터 수록 중에 SD 카드의 교환이 가능합니다.
편리한 기능
알람 출력 기능
이상 신호 발생시, 알람 신호를 출력합니다.
각 채널에서 조건 설정이 가능합니다.
출력은 4출력이 가능합니다.
USB 드라이브 모드
GL240과 PC를 USB 케이블로 연결하여 USB 드라이브 모드를 기동하면
GL240이 PC 드라이브의 하나로 인식되어 GL240 내의 측정 파일을 Drag&Drop으로 PC로 옮길 수 있습니다.
4.3인지 TFT 액정
보기 쉽고 조작성이 좋은 4.3인치 TFT 액정을 사용하였습니다.
3WAY 전원
GL240 전원은 AC 전원, DC, 배터리의 3가지 전원을 사용할 수 있습니다.
네트워크 기능
네트워크를 이용하여 데이터를 주고 받을 수 있습니다.
WEB 브라우저 기능 / FTP 서버 기능
FTP 클라이언트 기능 / NTP 클라이언트 기능
* 옵션 GL 무선 LAN 유닛(B-568)이 필요합니다.
Item | Description | |
---|---|---|
Number of analog input channels | 10 channels | |
External input/ | Input *2 | Trigger or Sampling (1 channel), Logic/Pulse (4 channels) |
Output *3 | Alarm (4 channels) | |
Sampling interval | 10 ms to 1 hour (10ms to 50ms: voltage only) *4, External signal | |
Time scale of waveform display | 1sec. to 24 hour /division | |
Trigger, | Trigger action | Start or stop capturing data by the trigger |
Repeat action | Off, On (auto rearmed) | |
Trigger source | Start: Off, Measured signal, Alarm, External, Clock, Week or Time | |
Condition Setting | Combination: OR or AND | |
Alarm output | Outputs a signal when alarm condition occurs in the input signal *5 | |
Pulse input | Rotation count | Counts the number of pulses per sampling interval and converts to rpm |
Accumulating | Accumulates the number of pulses from the start of measurement | |
Instant count | Counts the number of pulses per sampling interval | |
Calculation | Between channels | Addition, Subtraction, Multiplication, and Division for analog input |
Statistical | Select two calculations from Average, Peak, Maximum, Minimum, RMS | |
Search function | Search for analog signal levels, values of logic or pulse or alarm point | |
Interface to PC | USB (Hi-speed), WLAN (using B-568 option) | |
Storage | Internal | Built-in 4GB Flash Memory *6 |
External | One SD card slot (Support SDHC memory card, up to 32GB) *7 | |
Saved contents | Captured data, Setting conditions, Screen copy | |
Capturing mode | Mode: Normal, Ring, Relay | |
Replay Data | Replays captured data that was saved in the GL240 (in GBD or CSV format) | |
Scaling (Engineering unit) function | Measured value can be converted to the specified engineering unit | |
Action during data capture | • Displaying parst data (using dual display mode (Current + Past data)) | |
Display | Size | 4.3-inch TFT color LCD (WQVGA: 480 x 272 dots) |
Language | English, French, German, Chinese, Korean, Russian, Spanish, Japanese | |
Information *9 | Waveform in Y-T with digital values, Waveform only, Digital value, Digital values | |
Operating environment | 0 to 45 ºC, 5 to 85 % RH (non condensed) | |
Power source | AC adapter | 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory) |
DC power | 8.5 to 24 V DC (DC drive cable (option B-514) is required) | |
Battery pack | Mountable battery pack (battery pack (option B-569): 7.2V DC, 2900mAh) | |
Power consumption *10 | Max. 36 VA | |
External dimensions (W x D x H) | Approx.188 x 117 x 42 mm (Excluding projections) | |
Weight *11 | 500 g |
Item | Description | |
---|---|---|
Model name | GL100_240_840-APS | |
Supported OS | Windows 10, 8.1, 8, 7, Vista (32/64-bit edition) | |
Supported device | GL840 (USB, Ethernet, WLAN), GL240 (USB, WLAN), GL100 (USB, WLAN) | |
Functions | Control the GL series, Real-time data capture, Replay data, and Data format conversion | |
Supported units & channels | Up to 1000 channels total, Up to 4 groups (number of units is limited by model) | |
Settings control | Input condition, Captuering condition, Trigger/Alarm condition, Report, etc. | |
Capturing data | Saved to PC | Saves captured data in real time (in GBD binary or CSV format) |
Saved to GL unit | Saves to the SD memory card (in GBD binary or CSV format) | |
Displayed information | Y-T waveform, Digital values, Report, X-Y graph (specified period of data, data reply only), | |
File operation | Converting data format to CSV from GBD binary, merge multiple data files | |
Warning function | Send e-mail to the specified address when the alarms occur | |
Statistical calculation | Maximum, Minimum, and Avarage during data capturing | |
Report function | Creates the daily or monthly report automatically |
Item | Description |
---|---|
Model name | GL-Connect |
Supported OS | Android 4.1 to 6.0, iOS 7/8/9 (up to 9.3.4) |
Supported device | GL840 (WLAN), GL240 (WLAN), GL100 (WLAN) |
Functions | Control the GL series, Display measured data in waveform or digital value |
Supported units | Up to 10 units |
Settings control | Start/Stop, Sampling interval |
Capturing data | Saves captured data in the GL main body (data cannot be saved in the smart device) |
Displayed information | Data captured in real time by digital value, Replay the data stored in the GL body by the waveform |
Item | Description |
---|---|
Model number | B-568 |
Supported GL series | GL840, GL240 |
Communication method | Wireless communication (using radio waves in the 2.4GHz band) |
Supported WLAN system | IEEE802.11b/g/n |
Installed location | Attaches to the SD card slot on GL840 / GL240 *7 |
Function | Access Point mode: Communicate with the GL100-WL as a remote sensor |
Connected number of GL100-WL | GL840: Up to 5 units of the GL100-WL |
Item | Description | |||
---|---|---|---|---|
Input method | All channels isolated balanced input *12, Scans channels for sampling | |||
Type of input terminal | Screw terminal (M3 screw) | |||
Measurement | Voltage | 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 100 V, and 1-5V F.S. (Full Scale) | ||
Thermocouple | Type: K, J, E, T, R, S, B, N, and W (WRe5-26) | |||
Humidity | 0 to 100 % RH - using the humidity sensor (option B-530) | |||
Filter | Off, 2, 5, 10, 20, 40 (moving average in selected number) | |||
Measurement | Voltage | ± 0.1% of F.S. (Full Scale) | ||
Temperature | Type | Measurement range | Measurement accuracy | |
R | 0 ≤ TS ≤ 100 ºC | ± 5.2 ºC | ||
100 < TS ≤ 300 ºC | ± 3.0 ºC | |||
300 < TS ≤ 1600 ºC | ± (0.05% of rdg. + 2.0 ºC) | |||
S | 0 ≤ TS ≤ 100 ºC | ± 5.2 ºC | ||
100 < TS ≤ 300 ºC | ± 3.0 ºC | |||
300 < TS ≤ 1760 ºC | ± (0.05% of rdg. + 2.0 ºC) | |||
B | 400 ≤ TS ≤ 600 ºC | ± 3.5 ºC | ||
600 < TS ≤ 1820 ºC | ± (0.05% of rdg. + 2.0 ºC) | |||
K | -200 ≤ TS ≤ -100 ºC | ± (0.05% of rdg. + 2.0 ºC) | ||
-100 < TS ≤ 1370 ºC | ± (0.05% of rdg. + 1.0 ºC) | |||
E | -200 ≤ TS ≤ -100 ºC | ± (0.05% of rdg. + 2.0 ºC) | ||
-100 < TS ≤ 800 ºC | ± (0.05% of rdg. + 1.0 ºC) | |||
T | -200 ≤ TS ≤ -100 ºC | ± (0.1% of rdg. + 1.5 ºC) | ||
-100 < TS ≤ 400 ºC | ± (0.1% of rdg. + 0.5 ºC) | |||
J | -200 ≤ TS ≤ -100 ºC | ± 2.7 ºC | ||
-100 < TS ≤ 100 ºC | ± 1.7 ºC | |||
100 < TS ≤ 1100 ºC | ± (0.05% of rdg. + 1.0 ºC) | |||
N | -200 ≤ TS < 0 ºC | ± (0.1% of rdg. + 2.0 ºC) | ||
0 ≤ TS ≤ 1300 ºC | ± (0.1% of rdg. + 1.0 ºC) | |||
W | 0 ≤ TS ≤ 2000 ºC | ± (0.1% of rdg. + 1.5 ºC) | ||
R.J.C. | ± 0.5 ºC | |||
A/D converter | Sigma-Delta type, 16 bits (effective resolution: 1/40000 of the measuring full range) | |||
Maximum | Between | 20 mV to 1 V range: 60 Vp-p, | ||
Channels ((-) / (-)) | 60 Vp-p | |||
Channel / GND | 60 Vp-p | |||
Max. voltage | Between channels | 350 Vp-p (1 minute) | ||
Channel / GND | 350 Vp-p (1 minute) |
Item | Model number | Description |
---|---|---|
Wireless LAN unit | B-568 | WLAN adapter, IEEE802.11b/g/n |
Battery pack | B-569 | Rechargeable Lithium-ion battery (7.2 V, 2900mAh) |
Input/Output cable for GL series | B-513 | 2 m long (no clip on end of cable) |
DC drive cable | B-514 | 2 m long (no clip on end of cable) |
Humidity sensor | B-530 | With 3 m long signal cable (with power plug) |
Shunt resistor | B-551-10 | 250 ohms 0.1% (it converts the signal to the "1-5V" from the "4-20mA") |
AC power adapter | ACADP-20 | Input: 100 to 240 V AC, Output: 24 V DC |
|
|||||||||
회사명 : (주)네모테크
| 사업자등록번호 : 113-86-58137 [사업자정보확인]
| 주소 : 서울특별시 구로구 경인로53길 15 (중앙유통단지) 가동 2208호 (주)네모테크 통신판매업 신고 : 2015-서울구로-0513 | 연락처 : 02-2266-2429 | FAX : 02-2277-2892 | 개인정보보호 책임자 : 문용희 | 대표자 : 권상수 contact : nemotech1@naver.com for more information |
|||||||||